top of page

Load data for .450 Bushmaster + .45 | 285gr | Peregrine VRG-3

Recommended Powder(s): Vihtavuori N110

.450 Bushmaster + .45 | 285gr | Peregrine VRG-3

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.45 | 285gr | Peregrine VRG-3
Bullet Weight:
285gr | 18.5g
Bullet Diameter:
0.450" | 11.43mm
Bullet Length:
0.955" | 24.3mm
Caliber:
.450 Bushmaster load data
Case Length (l3):
1.700" | 43.2mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.429" | 10.9mm
Shank Seated Depth:
0.334" | 8.5mm
Case Capacity:
60.0 Grains of Water | 3.90 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
39160 psi | 2700 bar
LID:
LID_B8254_C759
Last updated:
2025-01-01
Recommended Twist Rate:
1:32 - 1:27

Load data for 26 loads in caliber .450 Bushmaster with .45 | 285gr | Peregrine VRG-3 bullet and 13 powders such as Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
88%
35056
90%
**06
98%
[Accurate 5744]*
<<locked>>
86%
34954
89%
**59
91%
Accurate No. 11 FS
<<locked>>
87%
34650
88%
**69
96%
Hodgdon LilGun
<<locked>>
85%
34316
88%
**57
100%
[IMR 4227]*
<<locked>>
96%
34330
88%
**52
93%
[Lovex D060]*
<<locked>>
88%
34519
88%
**49
91%
[Lovex D063]*
<<locked>>
85%
34867
89%
**52
91%
Lovex S053
<<locked>>
96%
31459
80%
**39
97%
[ReloadSwiss RS 36]*
<<locked>>
97%
32474
83%
**65
93%
SNPE Vectan BA6 1/2
<<locked>>
96%
29457
75%
**41
100%
[Shooters World Blackout]*
<<locked>>
85%
34867
89%
**52
91%
[Shooters World Buffalo Rifle]*
<<locked>>
88%
34519
88%
**49
91%
Vihtavuori N110 👍
<<locked>>
94%
34708
89%
**82
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
27601
70%
**75
95%
[Accurate 5744]*
<<locked>>
83%
32358
83%
**09
90%
[Accurate No. 11 FS]*
<<locked>>
81%
27963
71%
**50
93%
Hodgdon LilGun
<<locked>>
81%
29834
76%
**82
100%
[IMR 4227]*
<<locked>>
89%
27035
69%
**11
90%
[Lovex D060]*
<<locked>>
85%
31981
82%
**03
90%
[Lovex D063]*
<<locked>>
83%
32256
82%
**06
90%
[Lovex S053]*
<<locked>>
81%
19160
49%
**60
91%
[ReloadSwiss RS 36]*
<<locked>>
91%
27093
69%
**57
90%
SNPE Vectan BA6 1/2
<<locked>>
83%
19957
51%
**44
99%
[Shooters World Blackout]*
<<locked>>
83%
32256
82%
**06
90%
[Shooters World Buffalo Rifle]*
<<locked>>
85%
31981
82%
**03
90%
Vihtavuori N110
<<locked>>
81%
22974
59%
**65
99%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page